Go to the first, previous, next, last section, table of contents.
This chapter describes functions for generating random variates and
computing their probability distributions. Samples from the
distributions described in this chapter can be obtained using any of the
random number generators in the library as an underlying source of
randomness. In the simplest cases a nonuniform distribution can be
obtained analytically from the uniform distribution of a random number
generator by applying an appropriate transformation. This method uses
one call to the random number generator.
More complicated distributions are created by the
acceptancerejection method, which compares the desired
distribution against a distribution which is similar and known
analytically. This usually requires several samples from the generator.
The library also provides cumulative distribution functions and inverse
cumulative distribution functions, sometimes referred to as quantile
functions. The cumulative distribution functions and their inverses are
computed separately for the upper and lower tails of the distribution,
allowing full accuracy to be retained for small results.
The functions for random variates and probability density functions
described in this section are declared in `gsl_randist.h'. The
corresponding cumulative distribution functions are declared in
`gsl_cdf.h'.
Continuous random number distributions are defined by a probability
density function, p(x), such that the probability of x
occurring in the infinitesimal range x to x+dx is
p dx.
The cumulative distribution function for the lower tail is defined by,
P(x) = \int_{\infty}^{x} dx' p(x')
and gives the probability of a variate taking a value less than x.
The cumulative distribution function for the upper tail is defined by,
P(x) = \int_{x}^{\infty} dx' p(x')
and gives the probability of a variate taking a greater than x.
The upper and lower cumulative distribution functions are related by
P(x) + Q(x) = 1 and satisfy
0 <= P(x) <= 1,
0 <= Q(x) <= 1.
The inverse cumulative distributions,
x=P^{1}(P) and
x=Q^{1}(Q) give the values of x
which correspond to a specific value of P or {Q}.
They can be used to find confidence limits from probability values.
 Random: double gsl_ran_gaussian (const gsl_rng * r, double sigma)

This function returns a Gaussian random variate, with mean zero and
standard deviation sigma. The probability distribution for
Gaussian random variates is,
p(x) dx = {1 \over \sqrt{2 \pi \sigma^2}} \exp (x^2 / 2\sigma^2) dx
for x in the range \infty to +\infty. Use the
transformation z = \mu + x on the numbers returned by
gsl_ran_gaussian
to obtain a Gaussian distribution with mean
\mu. This function uses the BoxMueller algorithm which requires two
calls to the random number generator r.
 Function: double gsl_ran_gaussian_pdf (double x, double sigma)

This function computes the probability density p(x) at x
for a Gaussian distribution with standard deviation sigma, using
the formula given above.
 Function: double gsl_ran_gaussian_ratio_method (const gsl_rng * r, double sigma)

This function computes a Gaussian random variate using the
KindermanMonahan ratio method.
 Random: double gsl_ran_ugaussian (const gsl_rng * r)

 Function: double gsl_ran_ugaussian_pdf (double x)

 Random: double gsl_ran_ugaussian_ratio_method (const gsl_rng * r)

These functions compute results for the unit Gaussian distribution. They
are equivalent to the functions above with a standard deviation of one,
sigma = 1.
 Function: double gsl_cdf_gaussian_P (double x, double sigma)

 Function: double gsl_cdf_gaussian_Q (double x, double sigma)

 Function: double gsl_cdf_gaussian_Pinv (double P, double sigma)

 Function: double gsl_cdf_gaussian_Qinv (double Q, double sigma)

These functions compute the cumulative distribution functions
P(x), Q(x) and their inverses for the Gaussian
distribution with standard deviation sigma.
 Function: double gsl_cdf_ugaussian_P (double x)

 Function: double gsl_cdf_ugaussian_Q (double x)

 Function: double gsl_cdf_ugaussian_Pinv (double P)

 Function: double gsl_cdf_ugaussian_Qinv (double Q)

These functions compute the cumulative distribution functions
P(x), Q(x) and their inverses for the unit Gaussian
distribution.
 Random: double gsl_ran_gaussian_tail (const gsl_rng * r, double a, double sigma)

This function provides random variates from the upper tail of a Gaussian
distribution with standard deviation sigma. The values returned
are larger than the lower limit a, which must be positive. The
method is based on Marsaglia's famous rectanglewedgetail algorithm (Ann
Math Stat 32, 894899 (1961)), with this aspect explained in Knuth, v2,
3rd ed, p139,586 (exercise 11).
The probability distribution for Gaussian tail random variates is,
p(x) dx = {1 \over N(a;\sigma)} \exp ( x^2/(2 \sigma^2)) dx
for x > a where N(a;\sigma) is the normalization constant,
N(a;\sigma) = (1/2) erfc(a / sqrt(2 sigma^2)).
 Function: double gsl_ran_gaussian_tail_pdf (double x, double a, double sigma)

This function computes the probability density p(x) at x
for a Gaussian tail distribution with standard deviation sigma and
lower limit a, using the formula given above.
 Random: double gsl_ran_ugaussian_tail (const gsl_rng * r, double a)

 Function: double gsl_ran_ugaussian_tail_pdf (double x, double a)

These functions compute results for the tail of a unit Gaussian
distribution. They are equivalent to the functions above with a standard
deviation of one, sigma = 1.
 Random: void gsl_ran_bivariate_gaussian (const gsl_rng * r, double sigma_x, double sigma_y, double rho, double * x, double * y)

This function generates a pair of correlated gaussian variates, with
mean zero, correlation coefficient rho and standard deviations
sigma_x and sigma_y in the x and y directions.
The probability distribution for bivariate gaussian random variates is,
p(x,y) dx dy = {1 \over 2 \pi \sigma_x \sigma_y \sqrt{1\rho^2}} \exp ((x^2/\sigma_x^2 + y^2/\sigma_y^2  2 \rho x y/(\sigma_x\sigma_y))/2(1\rho^2)) dx dy
for x,y in the range \infty to +\infty. The
correlation coefficient rho should lie between 1 and
1.
 Function: double gsl_ran_bivariate_gaussian_pdf (double x, double y, double sigma_x, double sigma_y, double rho)

This function computes the probability density p(x,y) at
(x,y) for a bivariate gaussian distribution with standard
deviations sigma_x, sigma_y and correlation coefficient
rho, using the formula given above.
 Random: double gsl_ran_exponential (const gsl_rng * r, double mu)

This function returns a random variate from the exponential distribution
with mean mu. The distribution is,
p(x) dx = {1 \over \mu} \exp(x/\mu) dx
for
x >= 0.
 Function: double gsl_ran_exponential_pdf (double x, double mu)

This function computes the probability density p(x) at x
for an exponential distribution with mean mu, using the formula
given above.
 Function: double gsl_cdf_exponential_P (double x, double mu)

 Function: double gsl_cdf_exponential_Q (double x, double mu)

 Function: double gsl_cdf_exponential_Pinv (double P, double mu)

 Function: double gsl_cdf_exponential_Qinv (double Q, double mu)

These functions compute the cumulative distribution functions
P(x), Q(x) and their inverses for the exponential
distribution with mean mu.
 Random: double gsl_ran_laplace (const gsl_rng * r, double a)

This function returns a random variate from the Laplace distribution
with width a. The distribution is,
p(x) dx = {1 \over 2 a} \exp(x/a) dx
for \infty < x < \infty.
 Function: double gsl_ran_laplace_pdf (double x, double a)

This function computes the probability density p(x) at x
for a Laplace distribution with width a, using the formula
given above.
 Function: double gsl_cdf_laplace_P (double x, double a)

 Function: double gsl_cdf_laplace_Q (double x, double a)

 Function: double gsl_cdf_laplace_Pinv (double P, double a)

 Function: double gsl_cdf_laplace_Qinv (double Q, double a)

These functions compute the cumulative distribution functions
P(x), Q(x) and their inverses for the Laplace
distribution with width a.
 Random: double gsl_ran_exppow (const gsl_rng * r, double a, double b)

This function returns a random variate from the exponential power distribution
with scale parameter a and exponent b. The distribution is,
p(x) dx = {1 \over 2 a \Gamma(1+1/b)} \exp(x/a^b) dx
for
x >= 0. For b = 1 this reduces to the Laplace
distribution. For b = 2 it has the same form as a gaussian
distribution, but with
a = \sqrt{2} \sigma.
 Function: double gsl_ran_exppow_pdf (double x, double a, double b)

This function computes the probability density p(x) at x
for an exponential power distribution with scale parameter a
and exponent b, using the formula given above.
 Random: double gsl_ran_cauchy (const gsl_rng * r, double a)

This function returns a random variate from the Cauchy distribution with
scale parameter a. The probability distribution for Cauchy
random variates is,
p(x) dx = {1 \over a\pi (1 + (x/a)^2) } dx
for x in the range \infty to +\infty. The Cauchy
distribution is also known as the Lorentz distribution.
 Function: double gsl_ran_cauchy_pdf (double x, double a)

This function computes the probability density p(x) at x
for a Cauchy distribution with scale parameter a, using the formula
given above.
 Function: double gsl_cdf_cauchy_P (double x, double a)

 Function: double gsl_cdf_cauchy_Q (double x, double a)

 Function: double gsl_cdf_cauchy_Pinv (double P, double a)

 Function: double gsl_cdf_cauchy_Qinv (double Q, double a)

These functions compute the cumulative distribution functions
P(x), Q(x) and their inverses for the Cauchy
distribution with scale parameter a.
 Random: double gsl_ran_rayleigh (const gsl_rng * r, double sigma)

This function returns a random variate from the Rayleigh distribution with
scale parameter sigma. The distribution is,
p(x) dx = {x \over \sigma^2} \exp( x^2/(2 \sigma^2)) dx
for x > 0.
 Function: double gsl_ran_rayleigh_pdf (double x, double sigma)

This function computes the probability density p(x) at x
for a Rayleigh distribution with scale parameter sigma, using the
formula given above.
 Function: double gsl_cdf_rayleigh_P (double x, double sigma)

 Function: double gsl_cdf_rayleigh_Q (double x, double sigma)

 Function: double gsl_cdf_rayleigh_Pinv (double P, double sigma)

 Function: double gsl_cdf_rayleigh_Qinv (double Q, double sigma)

These functions compute the cumulative distribution functions
P(x), Q(x) and their inverses for the Rayleigh
distribution with scale parameter sigma.
 Random: double gsl_ran_rayleigh_tail (const gsl_rng * r, double a, double sigma)

This function returns a random variate from the tail of the Rayleigh
distribution with scale parameter sigma and a lower limit of
a. The distribution is,
p(x) dx = {x \over \sigma^2} \exp ((a^2  x^2) /(2 \sigma^2)) dx
for x > a.
 Function: double gsl_ran_rayleigh_tail_pdf (double x, double a, double sigma)

This function computes the probability density p(x) at x
for a Rayleigh tail distribution with scale parameter sigma and
lower limit a, using the formula given above.
 Random: double gsl_ran_landau (const gsl_rng * r)

This function returns a random variate from the Landau distribution. The
probability distribution for Landau random variates is defined
analytically by the complex integral,
p(x) = (1/(2 \pi i)) \int_{ci\infty}^{c+i\infty} ds exp(s log(s) + x s)
For numerical purposes it is more convenient to use the following
equivalent form of the integral,
p(x) = (1/\pi) \int_0^\infty dt \exp(t \log(t)  x t) \sin(\pi t).
 Function: double gsl_ran_landau_pdf (double x)

This function computes the probability density p(x) at x
for the Landau distribution using an approximation to the formula given
above.
 Random: double gsl_ran_levy (const gsl_rng * r, double c, double alpha)

This function returns a random variate from the Levy symmetric stable
distribution with scale c and exponent alpha. The symmetric
stable probability distribution is defined by a fourier transform,
p(x) = {1 \over 2 \pi} \int_{\infty}^{+\infty} dt \exp(it x  c t^alpha)
There is no explicit solution for the form of p(x) and the
library does not define a corresponding pdf
function. For
\alpha = 1 the distribution reduces to the Cauchy distribution. For
\alpha = 2 it is a Gaussian distribution with
\sigma = \sqrt{2} c. For \alpha < 1 the tails of the
distribution become extremely wide.
The algorithm only works for
0 < alpha <= 2.
 Random: double gsl_ran_levy_skew (const gsl_rng * r, double c, double alpha, double beta)

This function returns a random variate from the Levy skew stable
distribution with scale c, exponent alpha and skewness
parameter beta. The skewness parameter must lie in the range
[1,1]. The Levy skew stable probability distribution is defined
by a fourier transform,
p(x) = {1 \over 2 \pi} \int_{\infty}^{+\infty} dt \exp(it x  c t^alpha (1i beta sign(t) tan(pi alpha/2)))
When \alpha = 1 the term \tan(\pi \alpha/2) is replaced by
(2/\pi)\logt. There is no explicit solution for the form of
p(x) and the library does not define a corresponding pdf
function. For \alpha = 2 the distribution reduces to a Gaussian
distribution with
\sigma = \sqrt{2} c and the skewness parameter has no effect.
For \alpha < 1 the tails of the distribution become extremely
wide. The symmetric distribution corresponds to \beta =
0.
The algorithm only works for
0 < alpha <= 2.
The Levy alphastable distributions have the property that if N
alphastable variates are drawn from the distribution p(c, \alpha,
\beta) then the sum Y = X_1 + X_2 + \dots + X_N will also be
distributed as an alphastable variate,
p(N^(1/\alpha) c, \alpha, \beta).
 Random: double gsl_ran_gamma (const gsl_rng * r, double a, double b)

This function returns a random variate from the gamma
distribution. The distribution function is,
p(x) dx = {1 \over \Gamma(a) b^a} x^{a1} e^{x/b} dx
for x > 0.
 Function: double gsl_ran_gamma_pdf (double x, double a, double b)

This function computes the probability density p(x) at x
for a gamma distribution with parameters a and b, using the
formula given above.
 Function: double gsl_cdf_gamma_P (double x, double a, double b)

 Function: double gsl_cdf_gamma_Q (double x, double a, double b)

 Function: double gsl_cdf_gamma_Pinv (double P, double a, double b)

 Function: double gsl_cdf_gamma_Qinv (double Q, double a, double b)

These functions compute the cumulative distribution functions
P(x), Q(x) and their inverses for the gamma
distribution with parameters a and b.
 Random: double gsl_ran_flat (const gsl_rng * r, double a, double b)

This function returns a random variate from the flat (uniform)
distribution from a to b. The distribution is,
p(x) dx = {1 \over (ba)} dx
if
a <= x < b and 0 otherwise.
 Function: double gsl_ran_flat_pdf (double x, double a, double b)

This function computes the probability density p(x) at x
for a uniform distribution from a to b, using the formula
given above.
 Function: double gsl_cdf_flat_P (double x, double a, double b)

 Function: double gsl_cdf_flat_Q (double x, double a, double b)

 Function: double gsl_cdf_flat_Pinv (double P, double a, double b)

 Function: double gsl_cdf_flat_Qinv (double Q, double a, double b)

These functions compute the cumulative distribution functions
P(x), Q(x) and their inverses for a uniform distribution
from a to b.
 Random: double gsl_ran_lognormal (const gsl_rng * r, double zeta, double sigma)

This function returns a random variate from the lognormal
distribution. The distribution function is,
p(x) dx = {1 \over x \sqrt{2 \pi \sigma^2} } \exp((\ln(x)  \zeta)^2/2 \sigma^2) dx
for x > 0.
 Function: double gsl_ran_lognormal_pdf (double x, double zeta, double sigma)

This function computes the probability density p(x) at x
for a lognormal distribution with parameters zeta and sigma,
using the formula given above.
 Function: double gsl_cdf_lognormal_P (double x, double zeta, double sigma)

 Function: double gsl_cdf_lognormal_Q (double x, double zeta, double sigma)

 Function: double gsl_cdf_lognormal_Pinv (double P, double zeta, double sigma)

 Function: double gsl_cdf_lognormal_Qinv (double Q, double zeta, double sigma)

These functions compute the cumulative distribution functions
P(x), Q(x) and their inverses for the lognormal
distribution with parameters zeta and sigma.
The chisquared distribution arises in statistics If Y_i are
n independent gaussian random variates with unit variance then the
sumofsquares,
X_i = \sum_i Y_i^2
has a chisquared distribution with n degrees of freedom.
 Random: double gsl_ran_chisq (const gsl_rng * r, double nu)

This function returns a random variate from the chisquared distribution
with nu degrees of freedom. The distribution function is,
p(x) dx = {1 \over 2 \Gamma(\nu/2) } (x/2)^{\nu/2  1} \exp(x/2) dx
for
x >= 0.
 Function: double gsl_ran_chisq_pdf (double x, double nu)

This function computes the probability density p(x) at x
for a chisquared distribution with nu degrees of freedom, using
the formula given above.
 Function: double gsl_cdf_chisq_P (double x, double nu)

 Function: double gsl_cdf_chisq_Q (double x, double nu)

 Function: double gsl_cdf_chisq_Pinv (double P, double nu)

 Function: double gsl_cdf_chisq_Qinv (double Q, double nu)

These functions compute the cumulative distribution functions
P(x), Q(x) and their inverses for the chisquared
distribution with nu degrees of freedom.
The Fdistribution arises in statistics. If Y_1 and Y_2
are chisquared deviates with \nu_1 and \nu_2 degrees of
freedom then the ratio,
X = { (Y_1 / \nu_1) \over (Y_2 / \nu_2) }
has an Fdistribution F(x;\nu_1,\nu_2).
 Random: double gsl_ran_fdist (const gsl_rng * r, double nu1, double nu2)

This function returns a random variate from the Fdistribution with degrees of freedom nu1 and nu2. The distribution function is,
p(x) dx =
{ \Gamma((\nu_1 + \nu_2)/2)
\over \Gamma(\nu_1/2) \Gamma(\nu_2/2) }
\nu_1^{\nu_1/2} \nu_2^{\nu_2/2}
x^{\nu_1/2  1} (\nu_2 + \nu_1 x)^{\nu_1/2 \nu_2/2}
for
x >= 0.
 Function: double gsl_ran_fdist_pdf (double x, double nu1, double nu2)

This function computes the probability density p(x) at x
for an Fdistribution with nu1 and nu2 degrees of freedom,
using the formula given above.
 Function: double gsl_cdf_Fdist_P (double x, double nu1, double nu2)

 Function: double gsl_cdf_Fdist_Q (double x, double nu1, double nu2)

These functions compute the cumulative distribution functions
P(x) and Q(x) for the Fdistribution with nu1 and
nu2 degrees of freedom.
The tdistribution arises in statistics. If Y_1 has a normal
distribution and Y_2 has a chisquared distribution with
\nu degrees of freedom then the ratio,
X = { Y_1 \over \sqrt{Y_2 / \nu} }
has a tdistribution t(x;\nu) with \nu degrees of freedom.
 Random: double gsl_ran_tdist (const gsl_rng * r, double nu)

This function returns a random variate from the tdistribution. The
distribution function is,
p(x) dx = {\Gamma((\nu + 1)/2) \over \sqrt{\pi \nu} \Gamma(\nu/2)}
(1 + x^2/\nu)^{(\nu + 1)/2} dx
for \infty < x < +\infty.
 Function: double gsl_ran_tdist_pdf (double x, double nu)

This function computes the probability density p(x) at x
for a tdistribution with nu degrees of freedom, using the formula
given above.
 Function: double gsl_cdf_tdist_P (double x, double nu)

 Function: double gsl_cdf_tdist_Q (double x, double nu)

 Function: double gsl_cdf_tdist_Pinv (double P, double nu)

 Function: double gsl_cdf_tdist_Qinv (double Q, double nu)

These functions compute the cumulative distribution functions
P(x), Q(x) and their inverses for the tdistribution
with nu degrees of freedom.
 Random: double gsl_ran_beta (const gsl_rng * r, double a, double b)

This function returns a random variate from the beta
distribution. The distribution function is,
p(x) dx = {\Gamma(a+b) \over \Gamma(a) \Gamma(b)} x^{a1} (1x)^{b1} dx
for
0 <= x <= 1.
 Function: double gsl_ran_beta_pdf (double x, double a, double b)

This function computes the probability density p(x) at x
for a beta distribution with parameters a and b, using the
formula given above.
 Function: double gsl_cdf_beta_P (double x, double a, double b)

 Function: double gsl_cdf_beta_Q (double x, double a, double b)

These functions compute the cumulative distribution functions
P(x) and Q(x) for the beta distribution with
parameters a and b.
 Random: double gsl_ran_logistic (const gsl_rng * r, double a)

This function returns a random variate from the logistic
distribution. The distribution function is,
p(x) dx = { \exp(x/a) \over a (1 + \exp(x/a))^2 } dx
for \infty < x < +\infty.
 Function: double gsl_ran_logistic_pdf (double x, double a)

This function computes the probability density p(x) at x
for a logistic distribution with scale parameter a, using the
formula given above.
 Function: double gsl_cdf_logistic_P (double x, double a)

 Function: double gsl_cdf_logistic_Q (double x, double a)

 Function: double gsl_cdf_logistic_Pinv (double P, double a)

 Function: double gsl_cdf_logistic_Qinv (double Q, double a)

These functions compute the cumulative distribution functions
P(x), Q(x) and their inverses for the logistic
distribution with scale parameter a.
 Random: double gsl_ran_pareto (const gsl_rng * r, double a, double b)

This function returns a random variate from the Pareto distribution of
order a. The distribution function is,
p(x) dx = (a/b) / (x/b)^{a+1} dx
for
x >= b.
 Function: double gsl_ran_pareto_pdf (double x, double a, double b)

This function computes the probability density p(x) at x
for a Pareto distribution with exponent a and scale b, using
the formula given above.
 Function: double gsl_cdf_pareto_P (double x, double a, double b)

 Function: double gsl_cdf_pareto_Q (double x, double a, double b)

 Function: double gsl_cdf_pareto_Pinv (double P, double a, double b)

 Function: double gsl_cdf_pareto_Qinv (double Q, double a, double b)

These functions compute the cumulative distribution functions
P(x), Q(x) and their inverses for the Pareto
distribution with exponent a and scale b.
The spherical distributions generate random vectors, located on a
spherical surface. They can be used as random directions, for example in
the steps of a random walk.
 Random: void gsl_ran_dir_2d (const gsl_rng * r, double *x, double *y)

 Random: void gsl_ran_dir_2d_trig_method (const gsl_rng * r, double *x, double *y)

This function returns a random direction vector v =
(x,y) in two dimensions. The vector is normalized such that
v^2 = x^2 + y^2 = 1. The obvious way to do this is to take a
uniform random number between 0 and 2\pi and let x and
y be the sine and cosine respectively. Two trig functions would
have been expensive in the old days, but with modern hardware
implementations, this is sometimes the fastest way to go. This is the
case for the Pentium (but not the case for the Sun Sparcstation).
One can avoid the trig evaluations by choosing x and
y in the interior of a unit circle (choose them at random from the
interior of the enclosing square, and then reject those that are outside
the unit circle), and then dividing by
\sqrt{x^2 + y^2}.
A much cleverer approach, attributed to von Neumann (See Knuth, v2, 3rd
ed, p140, exercise 23), requires neither trig nor a square root. In
this approach, u and v are chosen at random from the
interior of a unit circle, and then x=(u^2v^2)/(u^2+v^2) and
y=uv/(u^2+v^2).
 Random: void gsl_ran_dir_3d (const gsl_rng * r, double *x, double *y, double * z)

This function returns a random direction vector v =
(x,y,z) in three dimensions. The vector is normalized
such that v^2 = x^2 + y^2 + z^2 = 1. The method employed is
due to Robert E. Knop (CACM 13, 326 (1970)), and explained in Knuth, v2,
3rd ed, p136. It uses the surprising fact that the distribution
projected along any axis is actually uniform (this is only true for 3d).
 Random: void gsl_ran_dir_nd (const gsl_rng * r, size_t n, double *x)

This function returns a random direction vector
v = (x_1,x_2,...,x_n) in n dimensions. The vector is normalized
such that
v^2 = x_1^2 + x_2^2 + ... + x_n^2 = 1. The method
uses the fact that a multivariate gaussian distribution is spherically
symmetric. Each component is generated to have a gaussian distribution,
and then the components are normalized. The method is described by
Knuth, v2, 3rd ed, p135136, and attributed to G. W. Brown, Modern
Mathematics for the Engineer (1956).
 Random: double gsl_ran_weibull (const gsl_rng * r, double a, double b)

This function returns a random variate from the Weibull distribution. The
distribution function is,
p(x) dx = {b \over a^b} x^{b1} \exp((x/a)^b) dx
for
x >= 0.
 Function: double gsl_ran_weibull_pdf (double x, double a, double b)

This function computes the probability density p(x) at x
for a Weibull distribution with scale a and exponent b,
using the formula given above.
 Function: double gsl_cdf_weibull_P (double x, double a, double b)

 Function: double gsl_cdf_weibull_Q (double x, double a, double b)

 Function: double gsl_cdf_weibull_Pinv (double P, double a, double b)

 Function: double gsl_cdf_weibull_Qinv (double Q, double a, double b)

These functions compute the cumulative distribution functions
P(x), Q(x) and their inverses for the Weibull
distribution with scale a and exponent b.
 Random: double gsl_ran_gumbel1 (const gsl_rng * r, double a, double b)

This function returns a random variate from the Type1 Gumbel
distribution. The Type1 Gumbel distribution function is,
p(x) dx = a b \exp((b \exp(ax) + ax)) dx
for \infty < x < \infty.
 Function: double gsl_ran_gumbel1_pdf (double x, double a, double b)

This function computes the probability density p(x) at x
for a Type1 Gumbel distribution with parameters a and b,
using the formula given above.
 Function: double gsl_cdf_gumbel1_P (double x, double a, double b)

 Function: double gsl_cdf_gumbel1_Q (double x, double a, double b)

 Function: double gsl_cdf_gumbel1_Pinv (double P, double a, double b)

 Function: double gsl_cdf_gumbel1_Qinv (double Q, double a, double b)

These functions compute the cumulative distribution functions
P(x), Q(x) and their inverses for the Type1 Gumbel
distribution with parameters a and b.
 Random: double gsl_ran_gumbel2 (const gsl_rng * r, double a, double b)

This function returns a random variate from the Type2 Gumbel
distribution. The Type2 Gumbel distribution function is,
p(x) dx = a b x^{a1} \exp(b x^{a}) dx
for 0 < x < \infty.
 Function: double gsl_ran_gumbel2_pdf (double x, double a, double b)

This function computes the probability density p(x) at x
for a Type2 Gumbel distribution with parameters a and b,
using the formula given above.
 Function: double gsl_cdf_gumbel2_P (double x, double a, double b)

 Function: double gsl_cdf_gumbel2_Q (double x, double a, double b)

 Function: double gsl_cdf_gumbel2_Pinv (double P, double a, double b)

 Function: double gsl_cdf_gumbel2_Qinv (double Q, double a, double b)

These functions compute the cumulative distribution functions
P(x), Q(x) and their inverses for the Type2 Gumbel
distribution with parameters a and b.
 Random: void gsl_ran_dirichlet (const gsl_rng * r, size_t K, const double alpha[], double theta[])

This function returns an array of K random variates from a Dirichlet
distribution of order K1. The distribution function is
p(\theta_1, ..., \theta_K) d\theta_1 ... d\theta_K =
(1/Z) \prod_{i=1}^K \theta_i^{\alpha_i  1} \delta(1 \sum_{i=1}^K \theta_i) d\theta_1 ... d\theta_K
for
theta_i >= 0
and
alpha_i >= 0. The delta function ensures that \sum \theta_i = 1.
The normalization factor Z is
Z = {\prod_{i=1}^K \Gamma(\alpha_i)} / {\Gamma( \sum_{i=1}^K \alpha_i)}
The random variates are generated by sampling K values
from gamma distributions with parameters
a=alpha_i, b=1,
and renormalizing.
See A.M. Law, W.D. Kelton, Simulation Modeling and Analysis (1991).
 Function: double gsl_ran_dirichlet_pdf (size_t K, const double alpha[], const double theta[])

This function computes the probability density
p(\theta_1, ... , \theta_K)
at theta[K] for a Dirichlet distribution with parameters
alpha[K], using the formula given above.
 Function: double gsl_ran_dirichlet_lnpdf (size_t K, const double alpha[], const double theta[])

This function computes the logarithm of the probability density
p(\theta_1, ... , \theta_K)
for a Dirichlet distribution with parameters
alpha[K].
Given K discrete events with different probabilities P[k],
produce a random value k consistent with its probability.
The obvious way to do this is to preprocess the probability list by
generating a cumulative probability array with K+1 elements:
C[0] = 0
C[k+1] = C[k]+P[k].
Note that this construction produces C[K]=1. Now choose a
uniform deviate u between 0 and 1, and find the value of k
such that
C[k] <= u < C[k+1].
Although this in principle requires of order \log K steps per
random number generation, they are fast steps, and if you use something
like \lfloor uK \rfloor as a starting point, you can often do
pretty well.
But faster methods have been devised. Again, the idea is to preprocess
the probability list, and save the result in some form of lookup table;
then the individual calls for a random discrete event can go rapidly.
An approach invented by G. Marsaglia (Generating discrete random numbers
in a computer, Comm ACM 6, 3738 (1963)) is very clever, and readers
interested in examples of good algorithm design are directed to this
short and wellwritten paper. Unfortunately, for large K,
Marsaglia's lookup table can be quite large.
A much better approach is due to Alastair J. Walker (An efficient method
for generating discrete random variables with general distributions, ACM
Trans on Mathematical Software 3, 253256 (1977); see also Knuth, v2,
3rd ed, p120121,139). This requires two lookup tables, one floating
point and one integer, but both only of size K. After
preprocessing, the random numbers are generated in O(1) time, even for
large K. The preprocessing suggested by Walker requires
O(K^2) effort, but that is not actually necessary, and the
implementation provided here only takes O(K) effort. In general,
more preprocessing leads to faster generation of the individual random
numbers, but a diminishing return is reached pretty early. Knuth points
out that the optimal preprocessing is combinatorially difficult for
large K.
This method can be used to speed up some of the discrete random number
generators below, such as the binomial distribution. To use if for
something like the Poisson Distribution, a modification would have to
be made, since it only takes a finite set of K outcomes.
 Function: gsl_ran_discrete_t * gsl_ran_discrete_preproc (size_t K, const double * P)

This function returns a pointer to a structure that contains the lookup
table for the discrete random number generator. The array P[] contains
the probabilities of the discrete events; these array elements must all be
positive, but they needn't add up to one (so you can think of them more
generally as "weights")  the preprocessor will normalize appropriately.
This return value is used
as an argument for the
gsl_ran_discrete
function below.
 Random: size_t gsl_ran_discrete (const gsl_rng * r, const gsl_ran_discrete_t * g)

After the preprocessor, above, has been called, you use this function to
get the discrete random numbers.
 Function: double gsl_ran_discrete_pdf (size_t k, const gsl_ran_discrete_t * g)

Returns the probability P[k] of observing the variable k.
Since P[k] is not stored as part of the lookup table, it must be
recomputed; this computation takes O(K), so if K is large
and you care about the original array P[k] used to create the
lookup table, then you should just keep this original array P[k]
around.
 Function: void gsl_ran_discrete_free (gsl_ran_discrete_t * g)

Deallocates the lookup table pointed to by g.
 Random: unsigned int gsl_ran_poisson (const gsl_rng * r, double mu)

This function returns a random integer from the Poisson distribution
with mean mu. The probability distribution for Poisson variates is,
p(k) = {\mu^k \over k!} \exp(\mu)
for
k >= 0.
 Function: double gsl_ran_poisson_pdf (unsigned int k, double mu)

This function computes the probability p(k) of obtaining k
from a Poisson distribution with mean mu, using the formula
given above.
 Random: unsigned int gsl_ran_bernoulli (const gsl_rng * r, double p)

This function returns either 0 or 1, the result of a Bernoulli trial
with probability p. The probability distribution for a Bernoulli
trial is,
p(0) = 1  p
p(1) = p
 Function: double gsl_ran_bernoulli_pdf (unsigned int k, double p)

This function computes the probability p(k) of obtaining
k from a Bernoulli distribution with probability parameter
p, using the formula given above.
 Random: unsigned int gsl_ran_binomial (const gsl_rng * r, double p, unsigned int n)

This function returns a random integer from the binomial distribution,
the number of successes in n independent trials with probability
p. The probability distribution for binomial variates is,
p(k) = {n! \over k! (nk)! } p^k (1p)^{nk}
for
0 <= k <= n.
 Function: double gsl_ran_binomial_pdf (unsigned int k, double p, unsigned int n)

This function computes the probability p(k) of obtaining k
from a binomial distribution with parameters p and n, using
the formula given above.
 Random: void gsl_ran_multinomial (const gsl_rng * r, size_t K, unsigned int N, const double p[], unsigned int n[])

This function returns an array of K random variates from a
multinomial distribution. The distribution function is,
P(n_1, n_2, ..., n_K) =
(N!/(n_1! n_2! ... n_K!)) p_1^n_1 p_2^n_2 ... p_K^n_K
where
(n_1, n_2, ..., n_K)
are nonnegative integers with
sum_{k=1}^K n_k = N,
and
(p_1, p_2, ..., p_K)
is a probability distribution with \sum p_i = 1.
If the array p[K] is not normalized then its entries will be
treated as weights and normalized appropriately.
Random variates are generated using the conditional binomial method (see
C.S. David, The computer generation of multinomial random
variates, Comp. Stat. Data Anal. 16 (1993) 205217 for details).
 Function: double gsl_ran_multinomial_pdf (size_t K, const double p[], const unsigned int n[])

This function computes the probability
P(n_1, n_2, ..., n_K)
of sampling n[K] from a multinomial distribution
with parameters p[K], using the formula given above.
 Function: double gsl_ran_multinomial_lnpdf (size_t K, const double p[], const unsigned int n[])

This function returns the logarithm of the probability for the
multinomial distribution
P(n_1, n_2, ..., n_K) with parameters p[K].
 Random: unsigned int gsl_ran_negative_binomial (const gsl_rng * r, double p, double n)

This function returns a random integer from the negative binomial
distribution, the number of failures occurring before n successes
in independent trials with probability p of success. The
probability distribution for negative binomial variates is,
p(k) = {\Gamma(n + k) \over \Gamma(k+1) \Gamma(n) } p^n (1p)^k
Note that n is not required to be an integer.
 Function: double gsl_ran_negative_binomial_pdf (unsigned int k, double p, double n)

This function computes the probability p(k) of obtaining k
from a negative binomial distribution with parameters p and
n, using the formula given above.
 Random: unsigned int gsl_ran_pascal (const gsl_rng * r, double p, unsigned int n)

This function returns a random integer from the Pascal distribution. The
Pascal distribution is simply a negative binomial distribution with an
integer value of n.
p(k) = {(n + k  1)! \over k! (n  1)! } p^n (1p)^k
for
k >= 0
 Function: double gsl_ran_pascal_pdf (unsigned int k, double p, unsigned int n)

This function computes the probability p(k) of obtaining k
from a Pascal distribution with parameters p and
n, using the formula given above.
 Random: unsigned int gsl_ran_geometric (const gsl_rng * r, double p)

This function returns a random integer from the geometric distribution,
the number of independent trials with probability p until the
first success. The probability distribution for geometric variates
is,
p(k) = p (1p)^(k1)
for
k >= 1.
 Function: double gsl_ran_geometric_pdf (unsigned int k, double p)

This function computes the probability p(k) of obtaining k
from a geometric distribution with probability parameter p, using
the formula given above.
 Random: unsigned int gsl_ran_hypergeometric (const gsl_rng * r, unsigned int n1, unsigned int n2, unsigned int t)

This function returns a random integer from the hypergeometric
distribution. The probability distribution for hypergeometric
random variates is,
p(k) = C(n_1,k) C(n_2, tk) / C(n_1 + n_2,k)
where C(a,b) = a!/(b!(ab)!). The domain of k is
max(0,tn_2), ..., max(t,n_1).
 Function: double gsl_ran_hypergeometric_pdf (unsigned int k, unsigned int n1, unsigned int n2, unsigned int t)

This function computes the probability p(k) of obtaining k
from a hypergeometric distribution with parameters n1, n2,
n3, using the formula given above.
 Random: unsigned int gsl_ran_logarithmic (const gsl_rng * r, double p)

This function returns a random integer from the logarithmic
distribution. The probability distribution for logarithmic random variates
is,
p(k) = {1 \over \log(1p)} {(p^k \over k)}
for
k >= 1.
 Function: double gsl_ran_logarithmic_pdf (unsigned int k, double p)

This function computes the probability p(k) of obtaining k
from a logarithmic distribution with probability parameter p,
using the formula given above.
The following functions allow the shuffling and sampling of a set of
objects. The algorithms rely on a random number generator as source of
randomness and a poor quality generator can lead to correlations in the
output. In particular it is important to avoid generators with a short
period. For more information see Knuth, v2, 3rd ed, Section 3.4.2,
"Random Sampling and Shuffling".
 Random: void gsl_ran_shuffle (const gsl_rng * r, void * base, size_t n, size_t size)

This function randomly shuffles the order of n objects, each of
size size, stored in the array base[0..n1]. The
output of the random number generator r is used to produce the
permutation. The algorithm generates all possible n!
permutations with equal probability, assuming a perfect source of random
numbers.
The following code shows how to shuffle the numbers from 0 to 51,
int a[52];
for (i = 0; i < 52; i++)
{
a[i] = i;
}
gsl_ran_shuffle (r, a, 52, sizeof (int));
 Random: int gsl_ran_choose (const gsl_rng * r, void * dest, size_t k, void * src, size_t n, size_t size)

This function fills the array dest[k] with k objects taken
randomly from the n elements of the array
src[0..n1]. The objects are each of size size. The
output of the random number generator r is used to make the
selection. The algorithm ensures all possible samples are equally
likely, assuming a perfect source of randomness.
The objects are sampled without replacement, thus each object can
only appear once in dest[k]. It is required that k be less
than or equal to n
. The objects in dest will be in the
same relative order as those in src. You will need to call
gsl_ran_shuffle(r, dest, n, size)
if you want to randomize the
order.
The following code shows how to select a random sample of three unique
numbers from the set 0 to 99,
double a[3], b[100];
for (i = 0; i < 100; i++)
{
b[i] = (double) i;
}
gsl_ran_choose (r, a, 3, b, 100, sizeof (double));
 Random: void gsl_ran_sample (const gsl_rng * r, void * dest, size_t k, void * src, size_t n, size_t size)

This function is like
gsl_ran_choose
but samples k items
from the original array of n items src with replacement, so
the same object can appear more than once in the output sequence
dest. There is no requirement that k be less than n
in this case.
The following program demonstrates the use of a random number generator
to produce variates from a distribution. It prints 10 samples from the
Poisson distribution with a mean of 3.
#include <stdio.h>
#include <gsl/gsl_rng.h>
#include <gsl/gsl_randist.h>
int
main (void)
{
const gsl_rng_type * T;
gsl_rng * r;
int i, n = 10;
double mu = 3.0;
/* create a generator chosen by the
environment variable GSL_RNG_TYPE */
gsl_rng_env_setup();
T = gsl_rng_default;
r = gsl_rng_alloc (T);
/* print n random variates chosen from
the poisson distribution with mean
parameter mu */
for (i = 0; i < n; i++)
{
unsigned int k = gsl_ran_poisson (r, mu);
printf (" %u", k);
}
printf ("\n");
return 0;
}
If the library and header files are installed under `/usr/local'
(the default location) then the program can be compiled with these
options,
gcc demo.c lgsl lgslcblas lm
Here is the output of the program,
$ ./a.out
2 5 5 2 1 0 3 4 1 1
The variates depend on the seed used by the generator. The seed for the
default generator type gsl_rng_default
can be changed with the
GSL_RNG_SEED
environment variable to produce a different stream
of variates,
$ GSL_RNG_SEED=123 ./a.out
GSL_RNG_SEED=123
4 5 6 3 3 1 4 2 5 5
The following program generates a random walk in two dimensions.
#include <stdio.h>
#include <gsl/gsl_rng.h>
#include <gsl/gsl_randist.h>
int
main (void)
{
int i;
double x = 0, y = 0, dx, dy;
const gsl_rng_type * T;
gsl_rng * r;
gsl_rng_env_setup();
T = gsl_rng_default;
r = gsl_rng_alloc (T);
printf ("%g %g\n", x, y);
for (i = 0; i < 10; i++)
{
gsl_ran_dir_2d (r, &dx, &dy);
x += dx; y += dy;
printf ("%g %g\n", x, y);
}
return 0;
}
Example output from the program, three 10step random walks from the origin.
The following program computes the upper and lower cumulative
distribution functions for the standard normal distribution at
x=2.
#include <stdio.h>
#include <gsl/gsl_cdf.h>
int
main (void)
{
double P, Q;
double x = 2.0;
P = gsl_cdf_ugaussian_P (x);
printf ("prob(x < %f) = %f\n", x, P);
Q = gsl_cdf_ugaussian_Q (x);
printf ("prob(x > %f) = %f\n", x, Q);
x = gsl_cdf_ugaussian_Pinv (P);
printf ("Pinv(%f) = %f\n", P, x);
x = gsl_cdf_ugaussian_Qinv (Q);
printf ("Qinv(%f) = %f\n", Q, x);
return 0;
}
Here is the output of the program,
prob(x < 2.000000) = 0.977250
prob(x > 2.000000) = 0.022750
Pinv(0.977250) = 2.000000
Qinv(0.022750) = 2.000000
For an encyclopaedic coverage of the subject readers are advised to
consult the book NonUniform Random Variate Generation by Luc
Devroye. It covers every imaginable distribution and provides hundreds
of algorithms.

Luc Devroye, NonUniform Random Variate Generation,
SpringerVerlag, ISBN 0387963057.
The subject of random variate generation is also reviewed by Knuth, who
describes algorithms for all the major distributions.

Donald E. Knuth, The Art of Computer Programming: Seminumerical
Algorithms (Vol 2, 3rd Ed, 1997), AddisonWesley, ISBN 0201896842.
The Particle Data Group provides a short review of techniques for
generating distributions of random numbers in the "Monte Carlo"
section of its Annual Review of Particle Physics.

Review of Particle Properties
R.M. Barnett et al., Physical Review D54, 1 (1996)
http://pdg.lbl.gov/.
The Review of Particle Physics is available online in postscript and pdf
format.
An overview of methods used to compute cumulative distribution functions
can be found in Statistical Computing by W.J. Kennedy and
J.E. Gentle. Another general reference is Elements of Statistical
Computing by R.A. Thisted.

William E. Kennedy and James E. Gentle, Statistical Computing (1980),
Marcel Dekker, ISBN 0824768981.

Ronald A. Thisted, Elements of Statistical Computing (1988),
Chapman & Hall, ISBN 0412013711.
The cumulative distribution functions for the Gaussian distribution
are based on the following papers,

Rational Chebyshev Approximations Using Linear Equations,
W.J. Cody, W. Fraser, J.F. Hart. Numerische Mathematik 12, 242251 (1968).

Rational Chebyshev Approximations for the Error Function,
W.J. Cody. Mathematics of Computation 23, n107, 631637 (July 1969).
Go to the first, previous, next, last section, table of contents.